Fastwel CPC510 3U CompactPCI Ivy Bridge i7 Board

Fastwel CPC510 3U CompactPCI Ivy Bridge i7 Board

  • Intel IvyBridge processors (2/4 Cores, up to 2,5 GHz)
  • Up to 8 GB soldered, dual_channel DDR3 SDRAM with ECC
  • 2 DisplayPort up to 2560х1600@60Hz at the front panel, 1 DisplayPort up to 2560х1600@60Hz is routed to the mezzanine module
  • 2xGigabit Ethernet ports (front panel)
  • 2xUSB 2.0 (front panel)
  • Intermodule communication (PICMG CPCI_S.0 CompactPCI® Serial): two x8 FatPipe PCI_E 2.0; four x4 PCI_E 2.0; 8 USB2.0 or 4 USB2.0 + 4 USB3.0; 2 SATA II and 2 SATA III
  • SD card slot with USB 2.0 interface
  • Increased heatsink versions for passive cooling
  • Protective coating (optional)
  • –40…+85°С or 0…+70°C (IEC 68-2-14-84)
  • Windows 7 Embedded, Linux 2.6, QNX 6.5

Fastwel CPC510 is a highly integrated 3U CPCI Serial solution for using in real time systems, manufacturing control, high-speed collection and processing of data. СРС510 is another product in the range of 3U CPCI modules manufactured by Fastwel Group.

The board is based on the Intel Ivy Bridge CPU (2- or 4-core CPUs) which has one of the highest performances in its class.

CPC510 uses high speed I/O interfaces (PCI-Express, Gigabit Ethernet) and modern technologies for video data processing. Modular structure of the device enables a flexible setting of the system for particular fields, which optimizes a price-quality relationship.

To expand CPC510 functionalities, MIC584 mezzanine module is used. Its detailed description is given in the User Manual.

Stable operation of CPC510 enables its use in all industrial applications. Components, on which CPC510 is based, are carefully selected in accordance with the embedded system applicability criteria which make the module perfectly fit for the long life cycle systems.

The module has the following structure of I/O channels:

— 2 GB/s Ethernet controllers (2x routed to the front panel);

— 12x USB 2.0 ports supporting HS, FS and LS data rates (2x on the front panel, 2x on the mezzanine, 8x on the backplane connector);

— 4x USB 3.0 ports (routed to the backplane connector)

— 6x SATA ports (4x ports are routed to the backplane connector, 1x — to the mezzanine board, 1 – switchable: backplane/mezzanine board)

— 1x DisplayPort, routed to MIC590 board (to the front panel of CPC510-02)

— 1x LVDS, routed to MIC590 board

— 2x DisplayPorts on the front panel.

— HD Audio, routed to the mezzanine connector.

— LPC, routed to the mezzanine connector.

 

https://www.prosoft.ru/cms/f/455616.pdf

Fastwel CPC506 3U 8HP cPCI CompactPCI Core 2 Duo Module

Fastwel CPC506 3U 8HP cPCI CompactPCI Core 2 Duo Module

  • Intel Core 2 Duo and Core 2 Solo processors (up to 2.2 GHz, 533 or 800 MHz FSB)
  • Up to 4 GB soldered DDR2 SDRAM
  • VGA graphics, resolution up to 2048×1536
  • Dual DVI-D interface, up to 1600х1200 (8HP and 12HP versions)
  • Intermodule communication (PICMG 2.30): 32-bit PCI bus, 4 x1 PCI Express, 2 SATA II, 4 USB 2.0
  • Two Gigabit Ethernet ports switchable between front panel and backplane
  • Soldered 4 GB NAND Flash with IDE interface
  • SD card slot with USB 2.0 interface
  • Increased heatsink versions for passive cooling
  • MIC584 mezzanine module: 1 SATA II, 6 RS-232/485, 2 USB, PS/2
  • Protective coating (optional)
  • Multiple shock / vibration stability: 50g / 5g (IEC 68-2-27-87; IEC 68-2-6-82)
  • Operating temperature range: –40…+85°С or 0…+70°C (IEC 68-2-14-84)
  • Linux, QNX, and Windows XP Embedded support

CPC506 is a PICMG 2.30 «CompactPCI Plus» compliant 3U module based on Intel Сore 2 Duo CPUs (from long term manufacturing program) operating at up to 2.2 GHz with 4 MB level 2 cache, featuring
800 MHz system bus and 965GME/ICH8M chipset. The processor executes up to 8 floating point operations per clock cycle and can address up to 4 GB of soldered DDR2 system memory in 64bit mode.

An increased heatsink for CPU and chipset cooling allows efficient heat dissipation within wide ambient air temperature range.

CPC506 is PICMG 2.30 «CompactPCI Plus» compliant and allows to use 32bit PCI bus together with intermodule communication for highspeed data exchange: two Gigabit Ethernet channels, four x1 PCI Express lanes, 4 USB channels.

The graphics controller of Intel 965GME supports output of two independent video streams to two DVID interfaces (8HP modification) or to standard VGA interface.

The firmware of CPC506 supports booting from LAN, from SD cards, from soldered 4 GB flash memory disk, or HDDs, installed on CompactPCI Plus carrier (KIC550) with SATA support, or from drives located on MIC584 mezzanine module. The MIC584 mezzanine module supports SATA II interface with option to mount 1.8″ SATA disk drive, SATA DOM solidstate modules and also offers six COM ports, two USB 2.0, PS/2 and audio interfaces.

CPC506 supports Linux, QNX and Windows XP Embedded operating systems.

 

 

https://www.prosoft.ru/cms/f/445171.pdf

 

 

 

 

Fastwel CPC504 3U CompactPCI Core 2 Duo SBC

The CPC504 is a 3U CompactPCI PICMG 2.0 compliant host processor module based on low power dual core Intel Сore 2 Duo CPUs operating at 1.6 GHz or 2.2 GHz with 4 MB level 2 cache and featuring 800 MHz system bus. The processor executes up to 8 floating point operations per clock cycle and can
address up to 4 GB of soldered DDR2 system memory in 64bit mode.

An increased heatsink for CPU and chipset cooling with effective surface area of up to 682 cm2 allows efficient heat dissipation within wide ambient air temperature range.

For highspeed data exchange CPC504 employs two Gigabit Ethernet channels, four x1 PCI-Express lanes, and 32-bit PCI bus. The graphics controller of Intel 965GME supports output of two independent video streams to VGA and LVDS interfaces or to two DVI-D interfaces available at MIC588 mezzanine expansion module.

The firmware of CPC504 supports booting from LAN, from the onboard SD cards, from soldered 4 GB flash memory disk, or from SATA II (up to 300 MB/s) and IDE drives located on MIC584 mezzanine expansion module or on a rear I/O module.

The MIC584 mezzanine module supports two SATA II interfaces with option to mount either SATA DOM solidstate modules or one standard 1.8″ SATA disk drive. Six COM ports, two USB 2.0, PS/2, and audio interfaces are available via the MIC584 module as well.

CPC504 supports Windows XP/XP Embedded, Linux, and QNX operating systems.

 

https://www.prosoft.ru/cms/f/445170.pdf

 

 

Fastwel CPC508 3U CompactPCI Atom N450/ D510 SBC

Fastwel CPC508 3U CompactPCI Atom N450/ D510 SBC

  • Intel Atom N450 or D510 CPU, soldered
  • 512MB or 1GB DDR2 SDRAM soldered
  • VGA up to 2048×1536
  • 2 GbEthernet frontrear switchable
  • PICMG2.30: PCI 32/33, PCIExpress 4×1, 2 SATA II, 4 USB
  • CF and SD interfaces, 1 or 2 GB Flash SSD soldered
  • Mezzanine 1: 2 USB, 2 RS232, 2 RS485 isolated,
  • 2 CAN 2.0 isolated, HD Audio, LVDS
  • Mezzanine 2: 2 USB, 4 RS232, 2 RS485, PS/2, HD Audio
  • Multiple shock / vibration stability: 50g / 5g (IEC 68-2-27-87; IEC 68-2-6-82)
  • Operating temperature range: From -40°C to +85°C (IEC 68-2-14-84)
  • OS compatibility: MS DOS 6.22, FreeDOS, Windows XP Embedded, Linux 2.6, QNX 6.5
  • MTBF: Not less than 100 000 hours

CPC508 is a 3U CompactPCI Atom N450/D510 PICMG 2.30 «CompactPCI Plus» compliant 3U module based on Intel® Atom™ N450 or D510 and ICH8M chipset. Due to the low power architecture of the Intel® Atom™ processor, the CPU card has a low power consumption and high performance. A specially outlined heat sink efficiently takes away the heat from the board, even at the extended temperature range.

CPC508 is designed especially for systems which require low power consumption, e.g. as a computing platform for rugged industrial PCs in mobile applications or for infotainment applications, offering the whole world of Windows® and Linux based software.

On the CPC508 module high-speed interfaces of input-output are applied (PCI-Express, Gigabit Ethernet, DVI) and modern technologies for operation with video are supported. Modular creation of a product allows system flexible set up for specific scopes, optimizing thereby the price/quality balance.

The PICMG 2.30 «CompactPCI Plus» compliance allows to use 32bit PCI bus together with intermodule communication for high-speed data exchange: two Gigabit Ethernet channels, four x1 PCI Express lanes, 4 USB channels, 2 SATA channels.

For extended system functionality the mezzanine module MIC589 with video/audio interfaces, CAN and serial ports is used. MIC589 can be connected to the processor CPC508 module from both sides left and right. One of the most important advantages of such expansion unit installation method is that it is possible to connect less cables to the processor CPC508 module or to avoid them absolutely. This can make the installation and dismantling of the CPU module from system easier.

 

https://www.prosoft.ru/cms/f/446098.pdf

CompactPCI — Kontron

CompactPCI — Kontron

Today’s demands on industrial PC technology require intelligent, cost-optimized products that are suitable for rugged environments and ensure longevity. These factors, along with many others, bring system designers back to the robust, modular and standardized CompactPCI / CPCI platforms. Available in both 3U and 6U form factors, this technology offers the latest and fastest Intel® Core™ processor technology for applications across all market spaces. Driven and supported by the PICMG group for more than 10 years, CompactPCI (CPCi) platforms are designed for modularity, ruggedization, Hot Swap, system management and provide densed computing performance, which is supported by optimized air or conduction cooled concepts.

To fulfill further market needs, the CompactPCI system platform provides:

  • Commercial-off-the-shelf (COTS) hardware
  • Open and modular systems based on international standards
  • Robustness, high Mean Time between Failures, low Life Cycle Costs
  • Long product lifetime and short design in times
  • Support of real-time and standard operating system as well as tool chains
  • Broad range of third-party hardware and software products
  • Excellent Service & Support

Related Information

Military Rugged COTS
We offer one of the largest product
portfolios to Rugged COTS
customers, which include
VME, CompactPCI, and VPX.

XMC/PMC
​We support a range of COTS
PCI (PMCs) & Switched Mezzanine
Cards (XMCs) for VME & CPCI
Systems used in Commercial
or harsh environments.