Many equipment manufacturers, who want to meet the requirements of the modern technical level, consider the CompactPCI Serial standard a rather attractive solution.
Range of Fastwel PC/104-Plus modules was expended with CPC310 - Intel Atom Bay Trail multicore based SBC designed for marine applications.
StackPC-PCI Interface Module NIM355 - is designed for use in on-board automatic control systems of the ground vehicles and is intended for expansion of basic functions of CPU modules (EX: CPB909), developed on the basis of StackPC, PCI/104 or PCI/104-Express standards.
Nowadays, Fastwel is the one that keeps producing Rugged Micro PC modules. If you have task related to the MicroPC system upgrade - this press-release might be interesting for you.
The Power Supply Module PS352 is a board in StackPC-PCI form-factor and is a follow-up of the range of Fastwel StackPC modules.
NM350 Gigabit Network Switch is a complete device with six Ethernet channels (4x ports with PoE support), designed for the use in the data acquisition and processing systems, operating in harsh environments.
CPB909 Module is an embedded single-board in 3,5” format and it is designed for embedded applications, requiring high performance and low power consumption.
Network Embedded Module NIM354 is designed for the use in embedded data acquisition and processing systems, operating in harsh environments and built based on Gigabit Ethernet interface, with a possibility to connect devices supporting PoE (Power over Ethernet) technology, where power is supplied over Ethernet data transfer lines.
An architecture of Ethernet-based distribution systems, where terminal devices (mainly video surveillance cameras) use the same cable for power supply, has gained popularity.
The new VIM556 3U CompactPCI Graphics Controller Module enables Fastwel to expand its range of peripherals in 3U CompactPCI Serial format.
Oil & Gas industry: Wellhead, Heavy Oil and Subsea applications.
The system is implemented on the basis of MicroPC processor Module CPC150*** from Fastwel (the module has been updated up to СРС152).
Upgrade your Octagon MicroPC System using Fastwel’s new CPC152 Vortex 86DX 600MHz Embedded Module. Low power consumption (5.5W). Windows 2000, XP Embedded, CE, QNX 4.25/6.3x, RTOS32 and Linux support.
eMMC is the standard type of flash used in portable devices but the BGA form factor brings with it limitations. With the card design compatible with SD slot, there will be no more BGA soldering quality issue.
6U CPCI (PICMG 2.0, 2.1, 2.16) Intel Core I7-3555 LE, 2,5 GHz CPU module - the rugged heart of your sonar system
Highly Efficient Multiprocessor Computers for Special Purpose Applications. The article describes a new rugged computer (-40C-+85C) for applications in sonar platforms, based on 6U CPCI (PICMG 2.0, 2.1, 2.16) Intel Core i7 CPU Module CPC503 developed by Fastwel.
СРС1311 - a new COM Express® mini format (Type 10), based on Bay Trail. Small and compact solution with powerful capabilities.
Range of Fastwel COM-modules was expanded with a new CPC1311 module in COM Express® mini format (Type 10).
High integrity CompactPCI S.0 Intel Core i7 based conduction cooled solution for your mission critical application
CPC510 CPU module is developed for customers as the high integrity solution in CPCI Serial 3U form-factor with a purpose of use in real-time, control and high-speed data acquisition and processing systems.
New interface module Fastwel KIC301 is developed to extend the functionality of the CPU modules used in harsh environments and mission-critical applications.
Consideration here is given to Fastwel experience in designing modules in 3U VITA 46/48 format with PCI Express interface for the use in the scalable crate, as well as to peculiarities of the CPU module implementation with PCI Express system bus on the basis of Fastwel CPB906 mezzanine COM module with PCI.
CPC503 Module based on the 3rd Generation of Intel Core CPU is available for ordering.
Range of Fastwel onboard computers was extended by MK308 Box PC.
Fastwel: PCI-Express is now departing from PC/104 station. The developers are asked to take their seats…
СРС309 CPU board is now available in StackPC-PCI form factor. It is designed for developers of on-board equipment in РС104/РС104-Plus standards, which stipulate high speed and performance.
5 Key innovations implemented in rugged CPC510 SBC.
Fastwel® Company represents СРС508 processor board in CompactPCI®PlusIO 3U format – a CPU board for generating highly reliable embedded monitoring and control systems balanced over a set of parameters.
Fastwel CPC308 – SBC with low heat emission, integrated graphics and wide range of communication interfaces.
Two new Fastwel PC/104-Plus single board computers – CPC306 and CPC307 are available for ordering now.
- Product Guide 2017 file (5,5 mb)